Bento Box Complete Hardware Kit
This hardware kit contains all necessary bolts, nuts, rods, magnets, and whatever else you need to finish your bento box. It includes the hardware for the scorpion brace and the optional magnets to make storage easier. it also includes hardware to make the folding grip.
This kit will allow you to build a version using the bronze bearing - make sure you print the correct receiver to use this part. It also contains hardware to make a printed takedown mechanism.
This kit is the hardware only, you will still need to furnish the additional factory 10/22 parts to complete this build.
Support the developer - a portion of the proceeds from each kit you buy will go back to InsertMeow (IMA) to support their continued work.
***THIS IS NOT A FIREARM***
KIT INCLUDES THE FOLLOWING PARTS:
(2) #12-24 Socket Head Screws 1 1/2”
(1) #12-24 Socket Head Screw 1”
(1) #12-24 Socket Head Screw 7/8”
(2) #8-32 Nuts
(1) M5x12mm Hex Set Screw
(1) Bronze Bearing for Barrel Insert
(2) 1/4”x1/4” Neodymium Magnets
(1) 3/16” x 54mm Steel Rod
(1) 1/8” x 30mm Steel Rod
(1) 1/4” - 20 Hex Head Screw
(1) 1/4” Nylon Lock Nut
(1) Brace Button Compression Spring
(1) Takedown Mechanism Compression Spring
