MAC DB9 SLIM Hardware Kit
This hardware kit contains all necessary bolts, nuts, rods, magnets, and whatever else you need to finish your DB9 Slim! It also contains the hardware for the printed brace options.
This kit is the hardware only, you will still need to furnish the additional metal components outlined in the readme to complete this build.
Support the developer - All of the proceeds from this kit will go to support the developer - DanishBulldog.
***THIS IS NOT A FIREARM***
This hardware kit contains all necessary bolts, nuts, rods, magnets, and whatever else you need to finish your DB9 Slim! It also contains the hardware for the printed brace options.
This kit is the hardware only, you will still need to furnish the additional metal components outlined in the readme to complete this build.
Support the developer - All of the proceeds from this kit will go to support the developer - DanishBulldog.
***THIS IS NOT A FIREARM***
This hardware kit contains all necessary bolts, nuts, rods, magnets, and whatever else you need to finish your DB9 Slim! It also contains the hardware for the printed brace options.
This kit is the hardware only, you will still need to furnish the additional metal components outlined in the readme to complete this build.
Support the developer - All of the proceeds from this kit will go to support the developer - DanishBulldog.
***THIS IS NOT A FIREARM***
HARDWARE LIST:
(2) M3x30 Socket Head - TOP COVER MID BOLTS
(3) M4x40 Socket Head - TOP COVER BACK BOLTS, TAILHOOK BOLT
(1) Feed Ramp Pin 1/8"x1.75" - FEED RAMP PIN
(1) Hand Stop Pin 4mmx22mm - HAND STOP PIN
(1) M5x25 Socket Head - GRIP SCREW
(1) M4x35 Socket Head - BRACE SECURING BOLT
(2) M4 Nut - BRACE SECURING NUT, REAR TAILHOOK SECURING NUT
(1) Brace Hinge Pin M4x40mm - BRACE HINGE PIN
(1) Folding Button Spring - RELEASE BUTTON SPRING
(1) M3x30mm Spring Pin - RELEASE BUTTON PIN
(1) 1/4-20x1.25" Bolt - TAILHOOK FOLDING BOLT
(1) 1/4-20 Nut - TAILHOOK FOLDING NUT
(2) M3 Brass Inserts - MID BOLT LOWER INSERT
(2) M4 Brass Inserts - BACK BOLT LOWER INSERT
(1) M5 Brass Insert - GRIP SCREW INSERT
(2) M6x20mm Male Barrel Nut (8mm OD) - TRUNNION PIN END BOLTS
(1) 6mmx35mm Threaded Rod - TRUNNION PIN BOLT
